FBT Series Filter Housings - 3 Round

Home
FBT Series Filter Housings - 3 Round

COST

Single-Round Filter Housing for Sanitary Liquid Filtration

FBT Series sanitary housings are designed specifically for liquid filtration in the food and beverage industry¹.

Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
Cost-effective without sacrificing quality and performance

FBT Housings are available in a standard sanitary design allowing a variety of connection options, or in a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and Benefits

Suitable for flow rates up to 91 liters/min (24 USgpm) depending on cartridge type and size
Suitable for CIP and SIP
Beveled housing tube sheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
Electropolished head and elbows and mirror polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
New cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability
Operator-friendly V-Clamp housing closure simplifies handling
Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2

Specifications

Minimum / Maximum Operating Pressure²

-1 to 10 bar (-14.5 to 150 psig)

Minimum / Maximum Operating Temperature^{3, 5}

Fluorocarbon Elastomer and Silicone seals -10 to 150 °C (14 to 300 °F) EPR seals -10 to 121 °C (14 to 250 °F)

Steam Sterilization^{3, 5}

Fluorocarbon Elastomer and Silicone seals 3.7 bar / 150 °C max (53 psig / 300 °F) EPR seals 1 bar / 121 °C max (14.5 psig / 250 °F)

Materials of Construction

Wetted parts 316L stainless steel

Housing Seal Options^{1, 4}

Fluorocarbon Elastomer
Silicone
EPR

Surface Finish

< 0.8 micron Ra (< 32 Ra microinches)

Connections

DIN 11851
Clamp Coupling
Butt Weld

Filter Cartridge Compatibility⁵

Pall Code 2 or Code 7 single open-end

Design Specification

Design capability of 4 times maximum operating pressure. Each housing is hydrostatically tested to 1.6 times maximum

Nominal Dimensions in mm (inches)

Code	Cartridge Height	A DIN Connec- tion	A Clamp Connec- tion	A Butt Weld Connec- tion	B Element Removal	C DIN Connec- tion	C Clamp Connec- tion	C Butt Weld Connec- tion
05	127 (5)	316.5 (12.5)	309.1 (12.2)	302 (11.9)	180 (7.1)	230 (9.1)	215 (8.5)	173 (6.8)
1	254 (10)	441.5 (17.4)	434.1 (17.1)	427 (16.8)	300 (11.8)	230 (9.1)	215 (8.5)	173 (6.8)
2	508 (20)	701.5 (27.6)	694.1 (27.3)	687 (27.0)	550 (21.7)	230 (9.1)	215 (8.5)	173 (6.8)
3	762 (30)	961.5 (37.9)	954.1 (37.6)	947 (37.3)	800 (31.5)	230 (9.1)	215 (8.5)	173 (6.8)

Filter Housing Diagram

Typical Water Flow / Pressure Drop Characteristics⁶

Volume and Weight

Code	Volume L (US Gal)	Weight kg (lb)
05	1.4 (0.37)	3.4 (7.5)
1	2.4 (0.63)	3.9 (8.6)
2	4.4 (1.16)	5.0 (11.0)
3	6.3 (1.66)	6.0 (13.2)

¹Please contact Pall to ensure the products meet specific National Legislation and/or Regional Regulatory requirements for food contact use.
²Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and seal used. For compatibility details, please contact Pall.
³For applications involving fluids below 0 °C (32 °F), please contact Pall.
⁴Check local pressure vessel code requirements.
⁵Refer to Pall Food and Beverage filter cartridge literature for additional guidelines on use.

Ordering Information / Part Numbers

This is a guide to the part numbering structure and possible options only. For availability of specific options, please contact Pall.

Example Part Number: FBT 01 1 G NW25 J (See bold references in tables below.)

Part Number: FBT < Cartridge Height Code from Table 1 > G < Inlet/Outlet Code from Table 2 >< Housing Seal Option from Table 3 > < Housing Design Code from Table 4 >

Table 1 - Cartridge Height

Code	Cartridge Height
05	127 mm (5 in.)
1	254 mm (10 in.)
2	508 mm (20 in.)
3	762 mm (30 in.)

Table 2 - Inlet/Outlet

Code	Inlet / Outlet	Vent	Drain
NW25	NW25 DIN 11851	NW25 DIN 11851	NW15 DIN 11851
23	1" Clamp Coupling	1" Clamp Coupling	½" Clamp Coupling
02	Butt Weld 25.4 x 1.6	Butt Weld 12.7 x 1.6	Butt Weld 12.7 x 1.6

Table 3 - Housing Seal

Code	Housing Seal Options
H	Fluorocarbon Elastomer
H4	Silicone
J	EPR

Table 4 - Housing Design

Code	Housing Design
Blank	Standard
3A	3-A Series

Note: Housings with clamp coupling and butt weld connections options are only available in 3-A series design. Housings with DIN connections are only available in standard design.

Spare Parts

Description	Standard Design / 3-A Design
Bowl Seal	GK1242PH01 (Fluorocarbon Elastomer) GK1242QL01 (Silicone) GK1242PX01 (EPR)
Bowl V-Clamp	ACS0942DA

Optional Accessories

Description	Connections⁺	Seal Material	Part Number	Connections⁺	Seal Material	Part Number
Vent Kit - Gauge	NW25	H H4 J	ACS0949AM ACS0950AU ACS0951AM	1" Clamp Coupling	H H4 J	ACS0958AM ACS0959AU ACS0960AM
Vent Kit -Stäubli* - Vent Valve	NW25	H H4 J	ACS0952AM ACS0953AU ACS0954AM	1" Clamp Coupling	H H4 J	ACS0961AM ACS0962AU ACS0963AM
Vent Kit - Stäubli* Vent Tee	NW25	H H4 J	ACS0946AM ACS0947AU ACS0948AM	1" Clamp Coupling	H H4 J	ACS0955AM ACS0956AU ACS0957AM
Drain Kit -Hosetail Valve (2 required per housing)	NW15	H H4 J	ACS0929EM ACS0930EU ACS0931EM	1/2" Clamp Coupling	H H4 J	ACS0932AM ACS0933AU ACS0934AM
Housing stand			FBT01STAND

⁺Connection kits are supplied either with DIN 11851 connection type or clamp coupling type. Please choose the desired option. Seal material options are H (Fluorocarbon Elastomer), H4 (Silicone) and J (EPR).

Get In Touch

Please fill out the form below with your details and message, and we'll get back to you as soon as possible.

Name*

Phone

Email*

Company*

Your Question*

I would like to receive more information about ABLROOTS INDUSTRIES products and services, and related products and services from ABLROOTS INDUSTRIES related companies via email or phone.