Monday – Friday 10 AM – 7 PM

DFT Classic® Fluoropolymer Series Filter Cartridges

Depth Filters for Aggressive and High Temperature Fluids

  • All PTFE construction for compatibility with a wide range of process fluids
  • Available in retention ratings of 0.5, 1, 3, 10, or 25 microns (μm)
  • Fits into most standard housings
  • May be used as a final filter in many applications, or to provide superior protection for membrane final filters
  • PVDF and PFA housings are available for use in all fluoropolymer filtration systems
  • M31 or DOE end configurations are available as standard products

Specifications

Performance Specifications

Filter grades

0.5, 1, 3, 10, 25 μm

Maximum operating temperature

PTFE is broadly compatible with many chemicals up to 185°C (365°F)2

Product Specifications

Materials of construction

Filter media: PTFE (fluoropolymer)
Center core: PTFE
222 O-ring: FEP encapsulated fluorocarbon elastomer (standard)

Dimensions (nominal)

Outside diameter:
  • 6.35 cm (2.5 in.), DOE only
  • 7.14 cm (2.81 in.), M3 only
Lengths: 25.4 cm (10 in.), 50.8 cm (20 in.), 76.2 cm (30 in.)

Additional High Temperature Materials

Pall can also supply DFT Classic filter cartridges in polyphenylene sulfide (PPS) for high temperature and aggressive applications. Additional PTFE products are also available, including the Fluoryte™ Series filter cartridge, an all-fluoropolymer membrane cartridge. Contact your local Pall representative or distributor for specific information on these products.

2 Because so many factors (e.g. elevated temperatures) can affect the chemical resistance of a given product, you should pre-test under your own operating conditions observing applicable safety practices such as those given in the Material Safety Data Sheet for each chemical. Pall Corporation can provide specific compatibility guidance, testing and data upon request.

Applications

Applications

  • Acid etch systems - including Piranha Etch Solvent Strip applications
  • Most aggressive and/or high temperature acids or solvents

Recirculating Applications

Retention ratings, by convention, are for single pass applications. Many applications involve recirculating systems, where the filter media has several opportunities to capture contaminant. For example, in a 15.1 liter (4 gallon) system circulating at 7.6 lpm (2 gpm), the fluid passes through the filter cartridge five times in ten minutes. Thus, the effective retention of a filter cartridge is much finer. Specifically, a cartridge rated at 0.5 μm (nominal) on a single pass is often an effective 0.2 μm (nominal) filter on a recirculating basis.

Multi-Pass

Performance

Liquid Retention Ratings (μm) (by ASTM F-795 Test)

Single Pass Multi-Pass
0.5 0.2
1 0.5
3 1
10 3
25 10

Typical Flow vs. Differential Pressure for Application Sizing

Unit conversion: 1 bar = 100 kPa

Flow rate is for a 25.4 cm (10 in) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).

Part Numbers / Ordering Information

Pall Part Number = T [1] [2] [3] Y - [4]

Table 1

Code Filter grades (μm)
0.5 0.5
001 1
003 3
010 10
025 25

Table 2

Code Diameter (cm/in.) nominal
A 6.35/2.5
BB 7.14 /2.81

Table 3

Code Cartridge lengths (cm/in.) nominal
10 25.4/10
204 50.8/20
304 76.2/30

Table 4

Code End configurations
Blank DOE industrial
M3 SOE flat closed end, external 222 O-ring (retrofits other manufacturers’ Code 0)2 (“BB” diameter) - only

2 For details, contact Pall Corporation.
4 If selecting Code ‘A’ (Table 2) and Code ‘20’ or ‘30’ in Table 3, add a ‘W’ in front of the Table 3 code. For example, ‘AW20’ or ‘AW30’ for the correct part number.

Get In Touch

Please fill out the form below with your details and message, and we'll get back to you as soon as possible.

Name*
Phone
Email*
Company*
Your Question*
I would like to receive more information about ABLROOTS INDUSTRIES products and services, and related product and services from ABLROOTS INDUSTRIES related companies via email or phone.

More Products

Ultra Clean Water Filtration Skid

Product Type: Systems

Segment: Semiconductor

View Details Add to Quote

Asymmetric P-Nylon Filter

Product Type: Filter Cartridges

Segment: Semiconductor

View Details Add to Quote

Pall Aria™ FB Automatic Backwashable Water Filtration Systems

Product Type: Systems

Segment: Beer (Corporate), Beer (Craft/Micro Breweries), Bottled Water, Cider, Dairy, Juice, Soft Drinks, Wine

View Details Add to Quote