Fluoro-Plus™ PVDF Series Filter Housings

Home
Ultra Pure Chemical Filters
Fluoro-Plus™ PVDF Series Filter Housings

High Performance PVDF Single Cartridge Filter Housings

Polyvinylidene fluoride (PVDF) materials of construction provide excellent chemical compatibility and strong mechanical properties with the lowest possible extractables
Accepts one 10.2 cm (4in), 25.4 cm (10in) or 30.5 cm (12in) 222 O-ring SOE style filter cartridge
3/4" NPT, 25 mm or 32 mm butt weld inlet / outlet connections available
Stainless steel mounting bracket available
Standard upstream and downstream gauge connections

Specifications

Materials of Construction

Head and Bowl	Polyvinylidene fluoride (PVDF)
O-ring	Fluorocarbon elastomer
Threaded Head Inserts	PTFE coated 316 stainless steel
Optional Mounting Bracket	Stainless steel
NPT Plugs	PFA

Connections	Inlet / Outlet	3/4ʺ NPT(standard) 25 mm butt weld 32 mm butt weld
Connections	Vent and Drain	1/4ʺ NPT
Cartridge Configurations	10.2 cm (4in)	M3 (Code 3), 222 O-rings, flat closed end
Cartridge Configurations	25.4 cm (10in) or 30.5 cm (12in)	M8 (Code 8), 222 O-rings, fin closed end
Maximum Operating Pressure		0.76 MPa @ 95 ºC / 1 1 0 psig @ 203 ºF 1.03 MPa @ 20 ºC / 150 psig @ 68 ºF

NOTE : Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and gasket / O-ring used. For inquiries on compatibility, contact Pall or your Pall distributor.

This housing is not recommended for compressed air or gas service. It is suitable for use with fully compatible* liquids only.
This housing is not recommended for acid service at the pressure shown.
Please contact Pall for detailed compatibility information.
* Which do not soften, swell, or adversely affect the product or its materials of construction.

NOTE : Use of this product in a manner other than in accordance with Pall’s current recommendations may lead to injury or loss. Pall cannot accept liability for such injury or loss.

Dimensions (nominal)

Part Numbers	Dimensions cm (in)
Part Numbers	A	B	C	D
IDO4-PVDF- 3/4	-	12.37 (4.87)	20.24 (7.97)	15.2 (6)
IDO4-PVDF-25BW	19.5 (7.68)	-	20.24 (7.97)	15.2 (6)
IDO4-PVDF-32BW	19.5 (7.68)	-	20.24 (7.97)	15.2 (6)
IDO10-PVDF- 3/4	-	12.37 (4.87)	41.71 (16.42)	33 (13)
IDO10-PVDF-25BW	19.5 ( 7.68)	-	41.71 (16.42)	33 (13)
IDO10-PVDF-32BW	19.5 ( 7.68)	-	41.71 (16.42)	33 (13)

Performance

Housing Differential Pressure vs. Liquid Flow Rate

Ordering Information

IDO [Table 1] PVDF [Table 2]

Table 1

Code	Cartridge Lengths cm (in)
4	10.2 / 4 (M3 only)
10	25.4 / 10
12	30.5 / 12 (M8 only)

Table 2

Code	Inlet / Outlet Connection Sizes
3/4	3/4 " NPT
25 BW	25 mm butt weld
32 BW	32 mm butt weld

Get In Touch

Please fill out the form below with your details and message, and we'll get back to you as soon as possible.

Name*

Phone

Email*

Company*

Your Question*

I would like to receive more information about ABLROOTS INDUSTRIES products and services, and related product and services from ABLROOTS INDUSTRIES related companies via email or phone.